Flame Photometer
59700
lakh
(Piece)
MRP:
64800
lakh
Product Overview
| Model | uFlameCal10 |
| Make | Analab |
| HSN Code | 90275010 |
Secure Transaction
36 Months Shelf Life
Delivery & Return
Estimated Delivery
International: 12-26 days
Domestic: 3-6 days
Return Policy
Return within 7 days
Duties & taxes non-refundable
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
Technical Specification
- Element Range : Na, K, & Li : 1-100 ppm, Ca : 15-100, Ba : 50-1000 ppm ppm
- Sensitivity : Na : 0.5 ppm, K : 0.5 ppm, Li : 0.5ppm, Ca : 15 ppm, Ba : 50 ppm
- Filter Selection : Automatic by soft touch key
- Resolution : 0.1 ppm
- Detector : Silicon Photodiode
- Linearity : Better than 2%
- Unit of Measurement : ppm
- Reproducibility : <1% Coefficient of Variation (CV) for 20 consecutive samples using 10 ppm Na set as maximum standard & Barium 3% CV for 20 consecutives samples of Concentrations between 50 to 199 ppm.
- Curve Fitting Accuracy : <1% error when 3 ppm Na/K and 5 ppm Li are set as maximum standards.
- Quick Calibration Facility : With highest standard
- Dilution Factor : Yes, by soft touch keypad
- Calibration : Upto 03 standards per Elements with Curve Fitting Software in-built with Instrument. (Automatic calculation of curve coefficient)
- Ignition System : Automatic
- Flame Type : LPG & Dry Oil Free Air
- Auto Flame ON / OFF Detection : Audio and Visual Alarm
- Gas Control : Adjustable with regulator
- Atomizer : Axial Flow Type
- Air Flow Monitoring Facility : 4 – 6 ml/min., In-built with Instrument
- Error Messages : “Home Detection”, “Memory Full”, “Flame is Off”, “Value Out of Limit”, “Do Warm-up”, “In Correct Standard” & “Enter in Range”.
- Display : 16 x 2 Line Alphanumeric LCD with Backlit
- Keypad : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS
- Air Supply Unit (Separate Unit) : Consist of Air Compressor, Pressure Gauge, Pressure Regulator, Moisture Filter, PU Tube (2 Meters) and Air filter with moisture absorbent catalyst.
- Calibration Data Storage : Non-Volatile Memory which can store, last calibration data for all elements.
- Analysis Data Storage : More than 500 analysis data which can be viewed & Print, company name, analysis date & time, record number, *Username, *Sample Name, *Bath Number/ID, Calibration data of lower & higher standard, result, Dilution factor, instrument serial number, Instrument Make & Model & *Signature etc. Secondly, analysis data can be print online without saving analysis data in Instrument.
(*: Not possible to enter data by instrument keypad but it will be handwritten) - Searching of data : With record number by scrolling.
- Report Formation : As per Non-GLP Compliance
- Printer Interface : Centronics Parallel Port / Serial (RS-232 C) Port
- Printer : 40 / 80 Column Dot Matrix Printer (Printer must procure optionally)
- Power Supply : 230VAC ± 10%, 50 Hz
- Dimensions:
● Net Dimension: 37 x 29 x 34 cm (L x W x H)
● Gross Dimension: 48 x 43 x 42 cm (L x W x H) - Weight:
● Net Weight: 8.5 kg
● Gross Weight: 14 kg
Related Products
Radwag Semi Micro Balance
225000
187000
4Y Touch Screen Semi Micro Balance
550000
455000
Radwag Analytical Balance
105000
89000
Standerd Weights
18000
16000
.webp)
Radwag Precision Balance
85000
75000
Radwag Moisture Analyzer
155000
135000
Detailed Inquiry Form
Fill in the details below to get a personalized quote
